Alabama window tint laws
Alabama's tint rules sit in Ala. Code 32-5C-2 through 32-5C-6, and the Alabama Law Enforcement Agency (ALEA) publishes a Highway Patrol page on tint regulations. Glacier's record for Alabama is flagged check-locally, so this page does not state a darkness figure for any window. For the limits on sedans and SUVs, see the table below and the official source.
One reason for that caution: the data notes that the ALEA page describes a darker allowance for SUVs behind the driver, while the statute sets one limit with no vehicle-class split, and the difference is not confirmed. Please confirm with the official source (ALEA) before you choose a shade for any window.
Other items in the record: windshield tint is limited to a transparent, non-red, non-amber band at the very top. A medical exemption is allowed on a physician statement, with a decal issued by ALEA. No color rule is stated in the statute or on the ALEA page. A reflectance limit and a measurement tolerance are also listed in the table.
Source: Ala. Code 32-5C-2 through 32-5C-6 and the ALEA Highway Patrol tint regulations page. Verified for Alabama on November 12, 2026.
Glacier supplies window film to tint shops and installers nationwide; see the shade and product pages for lines.
This is general information, not legal advice; check your state's current rules before choosing a shade.

Alabama VLT limits by window
Confirm with your state. We could not confirm every detail of Alabama’s rules from the official text, so treat these numbers as a starting point and check with the state before you quote a film.
Cars and sedans
Statute 32%; tolerance of at least 3 points
Same 32% statutory minimum
Rear windshield 32% minimum
Windshield. No material allowed except transparent non-red/amber strip on uppermost 6 inches (32-5C-2(a)(1), 32-5C-3(4)).
SUVs, vans and trucks
Same as sedan
ALEA page describes a darker allowance; the statute sets one 32% limit. Not confirmed for this state; check with ALEA.
ALEA page describes a darker allowance; the statute sets one 32% limit. Not confirmed for this state; check with ALEA.
Windshield. Same as sedan (uppermost 6 inches only).

Official sources
- Ala. Code 32-5C-2
- Ala. Code 32-5C-3
- Ala. Code 32-5C-4
- Ala. Code 32-5C-5
- Ala. Code 32-5C-6
- ALEA Highway Patrol tint regulations
A guide, not legal advice: tint laws change, so confirm the current rules with Alabama before you install. Last verified November 12, 2026.
Film lines for Alabama shops
Glacier sells automotive window film in several visible light transmission (VLT) options. Compare the three ceramic lines (Premium Ceramic, Ceramic Plus and Ceramic Ultimate Plus), see the full window film range, or open a wholesale account. Not sure which shade fits Alabama’s limits? Check the table above and confirm with Alabama before you quote a film.
Alabama tint law questions
What is the front side window tint limit in Alabama?
Front side windows must pass at least 32% of light. The statute allows a measurement tolerance of at least 3 points, and an officer must check with a meter first. The same 32% applies to rear side windows and the rear windshield on sedans.
Can SUVs and vans go darker behind the driver in Alabama?
The ALEA page says darker tint is allowed on SUVs behind the driver, but the statute sets one 32% limit with no vehicle-class split. This is not confirmed for this state; check with ALEA before installing.

Does Alabama allow a medical tint exemption?
Yes. ALEA grants an exemption on a physician's statement and issues a decal, which goes on the windshield. The darkness limit for an exempt vehicle is not confirmed for this state; check with ALEA to learn what applies to your exemption.
Does Alabama require a label on tinted windows?
Yes. A label visible from outside certifying compliance is required on tinted vehicles, and film makers must register their film and labels with ALEA. ALEA's page describes a dealer-applied sticker, while the statute only says a compliance label must be displayed, so confirm the format with ALEA.
Picking a shade? See choosing the right VLT, try it in the Film Studio or request a quote.

