
Paint protection film rolls for installers
Paint protection film (PPF) is a clear urethane film applied over a vehicle's paint to guard against rock chips, scuffs and road wear. Glacier supplies Iceberg gloss clear PPF, Blizzard satin PPF and Glacier Guard windshield protection film on rolls to PPF installers, tint shops and detailers. Glacier sells wholesale only.
Paint Protection Film levels
Each level suits a different job. Manufactured by Glacier.
Glacier paint protection film product lines.
What paint protection film does Glacier supply?
Glacier supplies three protection films on rolls: a gloss clear PPF for paint, a satin PPF for paint and a protection film for the windshield. Ask your Glacier rep what is available on a trade account.
| Line | Finish or surface | Pick it when | Page |
|---|---|---|---|
| Iceberg | Clear gloss, for painted panels | The owner wants factory paint to look unchanged | Clear PPF |
| Blizzard | Satin, for painted panels | The owner wants a satin finish plus protection | Satin PPF |
| Glacier Guard | Windshield protection film, for glass | The shop sells windshield protection | Glacier Guard |
Why do shops offer PPF?
PPF is a physical layer between the road and the paint. It is removable, so a shop can offer protection or a finish change without touching the paint underneath.
Who is Glacier paint protection film for?
Glacier sells PPF wholesale to shops. Drivers get it through an installer.
- PPF installers who cut patterns on a plotter or by hand.
- Tint shops adding PPF next to window film.
- Detailers and appearance shops selling protection packages.
- Dealers and resellers who carry Glacier film (apply for a trade account).

How do I choose between Iceberg, Blizzard and Glacier Guard?
Start with what the customer is asking for: keep the paint as it is, change the finish, or protect the glass. The film follows from that answer.
- Choose Iceberg when the owner wants the factory gloss kept and the film to disappear on the panel.
- Choose Blizzard when the owner wants a satin look over glossy paint without a repaint.
- Add Glacier Guard when the same customer wants the windshield protected too.
- Ask your Glacier rep for samples and look at them on a panel in daylight before you promise a look.

What PPF finishes can a shop offer?
Glacier PPF for paint comes in two finishes: gloss clear (Iceberg) and satin (Blizzard). Finish names are not standardized across the industry, so a sample on a real panel settles the conversation faster than a label.
- Gloss clear keeps the factory shine.
- Satin gives glossy paint a low-sheen look and is cared for a little differently. See the Blizzard page.

What coverage levels should a shop offer?
Most shops sell PPF in a few clear packages and let customers add high-wear areas. Our coverage guide shows how to build the menu without listing prices.
- Partial front or bumper.
- Full front: bumper, hood, fenders, mirrors and sometimes headlights.
- Extended front or track pack: front end plus rocker panels, A-pillars or roof leading edge.
- Full body: every painted panel.
- Custom areas: door edges, door cups, sills and trunk loading edge.
- Windshield film as an add-on to any level.

How do installers apply PPF?
PPF is applied wet. This is general good practice, not a Glacier procedure; see the installation guide for the full sequence. Glacier PPF ships as rolls, so installers cut each panel on a plotter or by hand.
- 1. Wash and decontaminate the paint. Fix chips and failing clear coat first.
- 2. Cut the panel pattern from the roll.
- 3. Apply slip solution to the paint and the adhesive side.
- 4. Position the film and squeegee the solution out.
- 5. Finish edges, inspect under bay light and hand the owner a care card.

What aftercare should a shop give PPF customers?
Give every customer a written care card. Our aftercare guide covers the basics, and your Glacier rep can confirm care steps for each film line.
- Expect some haze or small water pockets while the film settles.
- Wait the period your shop advises before the first wash.
- Hand wash gently and avoid close-range pressure washing, especially at edges.
- Satin film can need different care than gloss; ask your Glacier rep for care steps.
How do I compare PPF suppliers?
Suppliers differ in brand recognition, installer networks and roll formats, so weigh what matters to your shop. Glacier's case is a wholesale-only account and film that ships on rolls.
| What to compare | Why it matters | Glacier |
|---|---|---|
| Finishes | Sets your menu | Gloss clear and satin for paint, plus windshield film |
| Roll format | Decides fit with your plotter and pattern software | Rolls |
| What else does a bay need? | Sets the whole job | Tools, plotters, flooring and lighting are separate lines. Ask your Glacier rep what is available on a trade account. |
| Who the supplier sells to | Tells you who else the supplier sells to | Wholesale only: shops, installers, detailers and dealers |
| Samples | Lets you test before you stock | Sales reps provide samples |
| Product information | Ask every supplier the same questions | Ask your Glacier rep what product information is available for each film line. |
What else does a PPF bay need?
Film is one part of a PPF bay. Ask your Glacier rep what is available on a trade account.
- Squeegees, applicators, blades, scrapers and prep and slip supplies.
- Jaguar cutting plotters for pre-cut panels.
- Modular interlocking polypropylene tile flooring for the bay.
- Shop lighting: hexagon ceiling lights and straight wall lights.

What product information is available?
Ask your Glacier rep what product information is available for each film line.
How do I order Glacier PPF wholesale?
Apply for a trade account or request a quote with the lines and quantities you need. Glacier ships nationwide. Ask your Glacier rep about availability and timing for your order.

For vehicle owners: where do I get Glacier PPF?
Glacier does not sell to drivers. Ask your installer for Glacier PPF, or use the dealer finder to see Glacier dealers near you.
Which PPF rolls does Glacier supply?
Glacier supplies three protection films on rolls. Two go on painted panels and one goes on glass. Ask your Glacier rep what is available on a trade account.
| Roll | Goes on | Look | Choose it when | Page |
|---|---|---|---|---|
| Iceberg | Painted panels | Clear gloss | The owner wants factory paint to look unchanged | Clear PPF |
| Blizzard | Painted panels | Satin | The owner wants a satin finish over glossy paint, plus protection | Satin PPF |
| Glacier Guard | Windshield glass | Not a paint finish | The shop sells windshield protection | Glacier Guard |
What should I check when a PPF roll arrives?
Treat every new roll the same way. This is general good practice, not a Glacier procedure.
- Look at the carton for damage before you open it.
- Check that the label matches the finish you ordered: gloss, satin or windshield.
- Look at the film surface and the roll edges in good light before you cut.
- Keep the roll clean and protected as your supplier advises.
- Note which roll each job came from, so you can trace a question later.

How do I test a PPF roll before I commit to it?
A sample test answers more than a data sheet does. Run the same steps you would use on a customer car.
- Ask your Glacier rep for a sample of the finish you plan to sell.
- Prep a test panel the way you prep customer paint.
- Cut a pattern, apply the film wet and finish the edges.
- Look at the result in daylight and under bay lights.
- Show the panel to a customer or a second installer before you decide.
- Repeat with the second finish if you plan to offer both.
How do I compare PPF roll suppliers?
Ask every supplier the same questions so the answers compare on the same terms.
| Question to ask | Why it matters | Glacier |
|---|---|---|
| Which finishes come on rolls? | Sets your menu | Gloss clear and satin for paint, plus windshield film |
| Who does the supplier sell to? | Tells you who else sells to your customers | Wholesale only: shops, installers, detailers and dealers |
| Can I test before I buy? | Lets you judge the film on your own panels | Sales reps provide samples |
| What else does a bay need? | Sets the whole job | Tools, plotters, flooring and lighting are separate lines. Ask your Glacier rep what is available on a trade account. |
| What written product information is available? | Lets you compare suppliers on the same terms | Ask your Glacier rep what product information is available for each film line |
At a glance.
Ask your Glacier rep what product information is available.
- Finishes
- Gloss, Satin
- Roll widths
- Ask your Glacier rep
- Warranty
- 10 years (manufacturer)

Common questions
19 questions. Select one to open it.
What is paint protection film?
Paint protection film, or PPF, is a clear urethane film applied over a vehicle's paint to guard against rock chips, scuffs and road wear. It is removable.
Who sells paint protection film wholesale to installers?
Glacier supplies Iceberg gloss clear PPF, Blizzard satin PPF and Glacier Guard windshield protection film on rolls to PPF installers, tint shops, detailers and dealers. Apply for a trade account or request a quote.
What is the difference between Iceberg and Blizzard?
Iceberg is a gloss clear film that keeps the factory gloss. Blizzard is a satin film that gives glossy paint a satin look. The finish is the main difference.
What is Glacier Guard?
Glacier Guard is Glacier's windshield protection film, supplied to installers on rolls. It is for glass, while Iceberg and Blizzard are for painted panels.
What is the difference between PPF and window tint?
PPF protects paint. Window tint goes on glass to cut heat and glare and add privacy. Many shops offer both.
Can a detailer buy Glacier PPF?
Yes. Detailers and PPF installers can apply for a trade account. Glacier does not sell directly to vehicle owners.
What tools do I need to install PPF?
PPF work uses squeegees, blades, slip solution and prep supplies, and most shops cut with a plotter. Glacier sells these tools and Jaguar plotters.
What PPF coverage levels should my shop offer?
Most shops offer a few packages, from partial front to full body, plus add-ons for high-wear areas and the windshield. See the coverage guide linked on this page.
Does PPF stay on forever?
No. PPF is removable and wears over time. See your installer's aftercare guidance and ask your Glacier rep what product information is available.
Does Glacier give samples to shops?
Glacier sales reps provide samples. Apply for a trade account and a rep will follow up.
What should I ask a PPF supplier before buying rolls?
Ask about finishes, roll formats, care instructions, samples, how the supplier handles problems, and what written product information is available for each line. Our PPF buying guide has a longer checklist.
How do I order Glacier PPF wholesale?
Apply for a trade account or request a quote. Glacier ships nationwide.
What are PPF rolls?
PPF rolls are rolls of paint protection film. An installer unrolls the film, cuts it into a pattern for each panel of a vehicle and applies it wet over the paint. Shops buy rolls so one film can serve many different vehicles.
Where can an installer buy PPF rolls wholesale?
Glacier supplies Iceberg gloss clear PPF, Blizzard satin PPF and Glacier Guard windshield protection film on rolls to installers, tint shops, detailers and dealers. Apply for a trade account or request a quote.
Which PPF rolls does Glacier supply?
Glacier supplies Iceberg, a gloss clear PPF for painted panels, Blizzard, a satin PPF for painted panels, and Glacier Guard, a windshield protection film for glass. Each has its own page with details for shops.
Does Glacier sell pre-cut PPF panels?
Glacier supplies PPF on rolls. Shops cut the panels they need on a plotter with pattern software, or by hand. If pre-cut panels matter to your shop, ask your Glacier rep.
Can a tint shop add PPF to its window film account?
Yes. Tint shops can apply for a trade account and tell the Glacier rep which lines they want. Many tint shops add PPF next to window film and share the same bay tools.
What roll widths does Glacier PPF come in?
Ask your Glacier rep for the roll widths available for each film line. Confirm the width against your plotter and your pattern software before you order.
What else does Glacier supply for a PPF bay?
Glacier supplies squeegees, applicators, blades, scrapers, prep and slip supplies, Jaguar plotters, modular interlocking polypropylene flooring and shop lighting.
Related reading.
Interested in paint protection film?
Apply for a trade account and a Glacier rep will follow up.








