
Window film scrapers and blades for tint shops
Glacier supplies window film scrapers, scraper handles, replacement blades and knife blades for tint shops, PPF installers and detailers. Scrapers clear old film and adhesive from glass; blades keep a fresh edge on hand for prep and trimming. Glacier sells wholesale and ships nationwide. Use the tables to match each tool to the job.
Glacier Manufacturing, wholesale window film supplier to tint shops and installers, shipped nationwide.Where tint shops get scraper blades and knife blades
Tint shops, installers and dealers buy Glacier scraper blades, scraper handles and knife blades wholesale on a wholesale account. Listed packs include 100-pack 1 inch blades, 25-pack 4 inch blades and 50-count 9mm snap-off blades. Apply for a wholesale account or request a quote. Glacier ships nationwide. Ask your Glacier rep about availability and timing for your order.
- 1 Inch Scraper Blades and 1 Inch Plastic Scraper Blades are each listed as a 100-pack.
- 4 Inch Double Edged Carbon Steel Blades and 6 Inch Triumph Scraper Blades are each listed as a 25-pack.
- 9mm Stainless Steel Blades and the 30 Degree Black Steel Blade are listed as 50-count.
- Glacier lists a Blade Disposal Container and a Vinyl Cutter Blade.
- Glacier sells wholesale to shops, installers and dealers and ships nationwide.
Squeegees and hard cards · 1 Inch Scraper Blades, 100-pack · Glass prep guide
Scrapers
Corner Reach TrianglePointed scraper for tight corners.
BulldozerWide plastic scraper.
ConquerorRigid scraper for tint and adhesive work.
GatorFlexible plastic scraper.
Slim FootSlim-profile scraper.
ScrubberScraper with a built-in scrub pad.
Smart CardRounded-profile rigid card.
Yellow ContourContoured blade for curves.
Long 4 Inch ScraperFull-length 4-inch scraper.
Short 4 Inch ScraperCompact 4-inch scraper.
4 Inch Double Edged Angle ScraperDouble-edged angled scraper.Which scraper does what?
Glacier's scrapers cover removal, narrow gaps and paint-safe work.
| Scraper | What it is | Use it for |
|---|---|---|
| Bulldozer | Wide plastic scraper | Clearing film and adhesive off glass, with more coverage per pass |
| Conqueror | Rigid scraper | Pulling old tint and adhesive clean; used on wet glass |
| Gator | Flexible plastic scraper | Glass and paint-safe scraping; soft enough for trim and painted surfaces |
| Scrubber | Scraper with a built-in scrub pad | Stubborn adhesive and film residue after a first pass |
| Smart Card | Rigid card with a rounded profile; listed under scrapers | Edge and channel work |
| Corner Reach Triangle | Pointed scraper | Corners and edges a squeegee blade cannot reach cleanly |
| Slim Foot | Slim-profile scraper | Narrow gaps and tight trim lines |
| Yellow Contour | Contoured blade | Curves and tight body lines a straight edge cannot follow |

Which handle and blade systems does Glacier offer?
Ask your Glacier rep which handle pairs with each blade pack before you standardize. Blade material is not stated for most items.
| Handle or scraper | Pairs with | Notes |
|---|---|---|
| 8 Inch Big Mouth Handle | 8 Inch Beveled Blade or 8 Inch Pro Square Blade | Wide scraping work; beveled or square edge |
| 1 Inch Scraper Handle | 1 Inch Scraper Blades or 1 Inch Plastic Scraper Blades | Plastic blades are described as safer than steel on coated or tinted glass |
| Long 4 Inch Scraper | Glacier's 4 Inch blades | Full-length handle for extended prep |
| Short 4 Inch Scraper | Glacier's 4 Inch blades | Compact handle for tight spaces |
| 4 Inch Double Edged Angle Scraper | Double-edged blade | Flip the blade and keep working |
| 6 Inch Triumph Scraper Blades | Glacier's 6 Inch Triumph scraper | Pack of replacement blades; ask your rep which handle |

What knife and plotter blades does Glacier carry?
| Blade | What it is | Use it for |
|---|---|---|
| 9mm Stainless Steel Blades | Snap-off blades for utility knives | A fresh edge by snapping off the dull tip |
| 30 Degree Black Steel Blade | Graphics blades for utility knives | Fine detail and graphics work |
| Vinyl Cutter Blade | Replacement cutting blade | The wear part shops replace most often |
| Blade Disposal Container | Dedicated container for spent blades | Keeping loose blades out of trash bags, pockets and floor mats |
How often should blades be changed?
Change a blade as soon as it drags, skips or leaves a line. A dull blade scratches glass and tears film. This is general practice, not a Glacier rule.

How do you scrape glass safely?
General good practice, from the site's glass prep guidance:
- 1. Wet the glass first; scraping on wet glass is general practice.
- 2. Hold the scraper at a shallow angle to the glass.
- 3. Use a fresh blade and push in one direction.
- 4. Use plastic or paint-safe tools near trim and paint.
- 5. Wipe the residue away and check under bay light.
- 6. Put spent blades in a disposal container.
Who buys scrapers and blades?
- Window tint shops and removal crews.
- PPF installers and wrap shops.
- Detailers and dealership service bays.
- Mobile installers who want a compact kit.
- Fleet outfitters and dealers.

Does Glacier sell blades by the case across the US?
Glacier sells wholesale to shops, installers and dealers, and ships nationwide. Ask your Glacier rep about pack and case sizes, availability and timing. Apply for a wholesale account or request a quote.
For related reading, see how tint shops choose squeegees, blades and hard cards, tool sets for window tint and flat glass film, how to prep glass for tint and the tint shop equipment checklist.

Scrapers in use



More Glacier installation tools

Squeegees
Hard cards, felt-edge and contour squeegees.

Blades & Knives
Snap-off knives and replacement blades.

Scrapers
Glass scrapers and razor scrapers.

Applicators
PPF applicators and felt-edge tools.

Prep & Cleaning
Slip solution, towels and scrub pads.

Prep & Slip
Slip solution and prep gear.
Common questions
10 questions. Select one to open it.
What is a window film scraper used for?
Scrapers clear old film and adhesive from glass and help with prep. Glacier supplies scrapers for removal, narrow gaps and paint-safe work.
What tools do I need to remove window tint?
A scraper for film and adhesive, fresh blades, wet glass and a scrubber for residue. The Bulldozer, Conqueror and Scrubber are Glacier's removal tools.
What is the difference between the Bulldozer and the Conqueror?
The Bulldozer is a wide plastic scraper with more coverage per pass. The Conqueror is a rigid scraper for pulling old tint and adhesive clean, and is used on wet glass.
Is there a paint-safe scraper?
The Gator is a flexible plastic scraper described as paint-safe and soft enough for trim, while still rigid enough for glass.
What is the difference between a beveled and a square blade?
Glacier's 8 inch blades come beveled or square-edge. Beveled has an angled edge; the Pro Square Blade has no bevel.
Are plastic scraper blades safer on tinted glass?
Glacier describes its plastic scraper blades as safer than steel on coated or tinted glass. They are still an edge, so handle with care.
What blades do window tint knives take?
Glacier carries snap-off blades for utility knives and a 30 degree graphics blade. Ask your rep about knife compatibility.
Does Glacier sell plotter blades?
Yes. The Vinyl Cutter Blade is a replacement blade.
How often should blades be changed?
As soon as they drag or skip.
Where can a tint shop buy blades and scrapers in bulk?
Glacier sells wholesale to shops, installers and dealers. Ask your rep about pack and case options.
Keep exploring
Related products
Ask your Glacier rep what is available on a wholesale account.
Add to your film order












