Maryland window tint laws
Maryland window tint law is a case where two sources disagree. The record cites Md. Code, Transp. 22-406(i) and COMAR 11.14.04.16(D), which differ by vehicle class; COMAR restricts front tint on some multipurpose vehicles. Because of that conflict and the check-locally flag, this page states no darkness figure; see the table and official source.
On the windshield, the data describes no tint below the AS-1 line or below a set distance from the top; for multipurpose vehicles that applies, while trucks and buses get no tint. No mirrored, one-way or sparkling effect is allowed, and red, yellow or amber tint (or tint that changes to those colors) is barred.
A Maryland-licensed physician certification, kept in the vehicle, supports a medical exemption for up to 2 years, or indefinitely if the condition is permanent. Removable tint for a child under 10 is exempt.
Confirm with the official source, the state, before you choose a shade for any Maryland window.
Where this page points: Md. Code, Transp. 22-406(i) and COMAR 11.14.04.16(D); the Maryland record carries a verification date of November 12, 2026.
Glacier supplies window film to tint shops and installers nationwide; see the shade and product pages for lines.
This is general information, not legal advice; check your state's current rules before choosing a shade.

Maryland VLT limits by window
Confirm with your state. We could not confirm every detail of Maryland’s rules from the official text, so treat these numbers as a starting point and check with the state before you quote a film.
Cars and sedans
Not confirmed for this state; the statute and COMAR differ by vehicle class. Check with the state.
Not confirmed for this state; the statute and COMAR differ by vehicle class. Check with the state.
Not confirmed for this state; the statute and COMAR differ by vehicle class. Check with the state.
Windshield. No tint below AS-1 line or below 5 inches from top
SUVs, vans and trucks
Statute and COMAR differ; COMAR restricts front tint on some multipurpose vehicles. Check with the state.
Any darkness with outside mirror each side
Any darkness with outside mirror each side
Windshield. MPV: not below AS-1 or 5 inches; trucks/buses: no tint

Official sources
A guide, not legal advice: tint laws change, so confirm the current rules with Maryland before you install. Last verified November 12, 2026.
Film lines for Maryland shops
Glacier sells automotive window film in several visible light transmission (VLT) options. Compare the three ceramic lines (Premium Ceramic, Ceramic Plus and Ceramic Ultimate Plus), see the full window film range, or open a wholesale account. Not sure which shade fits Maryland’s limits? Check the table above and confirm with Maryland before you quote a film.
Maryland tint law questions
What is the front window tint limit in Maryland?
This is not confirmed for this state: the statute and COMAR differ on which vehicle classes the front-window rule covers. COMAR restricts front-window tint on trucks, buses, limousines and certain multipurpose vehicles. Check your vehicle's class and limit with the state before tinting.
What are the rear window rules for Maryland SUVs?
Multipurpose vehicles may use any darkness on rear side and rear windows as long as there is an outside mirror on each side. For sedans, the back and rear window limits are not confirmed for this state because the statute and COMAR differ by class. Check with the state.

Does Maryland allow a medical exemption for tint?
Yes. A Maryland-licensed physician must certify the need, and the certification stays in the vehicle. It can run up to 2 years, or indefinitely if the condition is permanent. Removable tint for a child under 10 is also exempt.
What does Maryland say about tint materials and labels?
No certificate is required, but tint manufacturer labels must not affect the driver's vision or cover the glazing AS marking. Film cannot give a mirrored, one-way or sparkling effect. Red, yellow or amber tint, or tint that changes to those colors, is not allowed.
Picking a shade? See choosing the right VLT, try it in the Film Studio or request a quote.

