How to choose a window tint plotter
Guide

How to choose a window tint plotter

Choose a tint plotter by the work you cut and the space you have. Glacier supplies Jaguar plotters in two widths. This guide lists what to ask before you buy and explains how a shop decides between a plotter and hand cutting.

What does a window tint plotter cut?

A tint plotter is a cutting machine that cuts film panels from a pattern before the film goes near the vehicle. It replaces hand cutting on the glass.

It cuts the film you load, so the same machine can cut different materials if the settings and blade suit them.

  • Window film patterns for vehicles.
  • Special shapes and logos.
Roll feed from stand to cutter.

Which tint plotter should a new shop buy: 40 inch or 72 inch?

Glacier sells the Jaguar plotter in 40 inch and 72 inch widths. Choose by the patterns you cut and the floor space you have.

A Glacier rep can help you match the width to your bay. Bring the roll widths you plan to run.

Comparison
QuestionJaguar 40 inchJaguar 72 inch
What it isJaguar plotter, 40 inchJaguar plotter, 72 inch
Model number, cutting speed, bed size, warrantyAsk your Glacier repAsk your Glacier rep

What software does a window tint plotter use?

A plotter is driven by pattern software, which holds vehicle patterns and sends the cut to the machine. Ask your Glacier rep what product information is available.

Stack of pre-cut curved window film panels with liners on a padded bench

What should you ask about software and patterns?

The machine is only half the setup. These questions apply to any plotter or software you consider.

  • Does the software work with the plotter you are buying?
  • Does it include a vehicle pattern database, and how often is it updated?
  • Which materials does it support?
  • Can you add custom shapes and logos?
  • How is it licensed and supported?
  • Does it run on the computer you already own?

What else should you compare?

Use the same list for any plotter, including ours.

  • Width: matched to the patterns and rolls you will run.
  • Consumables: replacement blades should be easy to get. Glacier sells a replacement plotter blade.
  • Support and service: who do you call, and does the seller stand behind the machine?
  • Space and power: footprint, stand and where the cut panels will land.
  • Training: how do you learn the machine and the software?
Gloved hands smoothing a pre-cut film panel onto a car quarter window

Plotter, pattern software or hand cutting: which does a shop need?

These are different things, and many shops use all of them at different times.

Comparison
OptionWhat it doesGood for
Plotter plus pattern softwareCuts panels from a vehicle databaseShops that tint or install PPF every day
Pattern software onlySupplies patterns and drives the cutShops that already own a plotter
Hand cuttingFilm cut on the glass or on a tableLow volume work and special shapes

How do you calibrate a plotter after you buy it?

Set blade depth, then cutting force and speed, test-cut a small square and run the calibration routine before the first paid job.

The Glacier plotter calibration guide walks through each step.

Gloved hands loading a roll of dark film onto a plotter's roller bar, bay behind.

Who buys a plotter from Glacier?

Glacier sells to shops, installers and dealers, not to drivers or homeowners. The plotters are for people who cut film for a living, such as new and expanding tint shops, wrap and sign shops, detailers adding tint, and dealerships and fleet shops.

What mistakes do new shops make when buying a plotter?

Most regrets are about the setup around the machine.

  • Buying the machine before checking the software and pattern database.
  • Choosing a width without measuring the bay and the stand.
  • Skipping spare blades.
  • Skipping calibration and test cuts before the first paid job.
  • Forgetting where cut panels will land.
Freshly plotter-cut window film panels stacked on a clean cutting table, gloved hand lifting one, no flat lay of text.

How do you plan the first week with a new plotter?

Plan the first week before the machine arrives.

  • 1. Place the stand and clear room for the roll.
  • 2. Connect the plotter and confirm the software sees it.
  • 3. Fit a fresh blade and set blade depth.
  • 4. Test-cut a small square and calibrate.
  • 5. Cut a few practice panels before real work.

How do you decide between a plotter and hand cutting?

Hand cutting works for low volume and special shapes. A plotter pays off when a shop cuts patterns every day, because the same pattern cuts the same way for every installer and scrap is easier to track.

If you are unsure, talk to a Glacier rep about your weekly work before you decide.

Gloved hand cutting dark film on the glass of a dark grey pickup truck with a snap-off knife, light behind the window.

Can you buy the plotter, film and tools together?

Glacier carries the Jaguar plotter, makes the film it cuts, and supplies installation tools, modular interlocking polypropylene floor tile and shop lighting. A new shop can ask a Glacier rep what is available on a wholesale account. Glacier ships nationwide; ask your Glacier rep about availability and timing for your order.

In this guide
  1. What does a window tint plotter cut?
  2. Which tint plotter should a new shop buy: 40 inch or 72 inch?
  3. What software does a window tint plotter use?
  4. What should you ask about software and patterns?
  5. What else should you compare?
  6. Plotter, pattern software or hand cutting: which does a shop need?
  7. How do you calibrate a plotter after you buy it?
  8. Who buys a plotter from Glacier?
  9. What mistakes do new shops make when buying a plotter?
  10. How do you plan the first week with a new plotter?
  11. How do you decide between a plotter and hand cutting?
  12. Can you buy the plotter, film and tools together?

Quick answers

10 questions. Select one to open it.

What is a window tint plotter?

A window tint plotter is a cutting machine that cuts film panels from a vehicle pattern database. It lets a shop cut film before it goes on the glass instead of trimming by hand on the vehicle.

Which tint plotter should a new shop buy: 40 inch or 72 inch?

Glacier sells the Jaguar in both widths. The widths are 40 inch and 72 inch. A Glacier rep can match the width to your bay.

Which window tint plotter is right for a small tint shop?

The right plotter depends on the patterns you cut and your floor space. A Glacier rep helps you pick the width that fits your bay and your work.

What tint plotter and software should a new window tint shop buy and who sells them?

Glacier sells the Jaguar plotter in 40 inch and 72 inch widths. Ask your Glacier rep what product information is available.

What software do window tint plotters use?

They use pattern software that holds vehicle patterns and sends the cut to the machine. Ask your Glacier rep what product information is available.

How do I choose window tint cutting software and a plotter?

Ask your Glacier rep what is available to pair with the Jaguar plotter. This page does not list bundle contents.

How do you calibrate a window tint plotter?

Set blade depth, then cutting force and speed, test-cut a small square and run the calibration routine. The Glacier plotter calibration guide covers each step.

What tools do I need to start a window tint shop?

A plotter, pattern software, film, squeegees, blades, a clean bay with good lighting, and floor tile. Glacier supplies Jaguar plotters in two widths. Glacier also supplies film, tools, modular interlocking polypropylene tile and shop lighting.

Do you ship plotters across the US?

Glacier ships nationwide. Ask your Glacier rep about availability and timing for your order. Wholesale accounts are for shops, installers and dealers.

Which plotter consumables should I check before I buy?

Check that replacement blades are easy to get, and plan for spare blades. Glacier sells a replacement plotter blade, so a shop can order it with its film and tools. Skipping spare blades is a common new-shop mistake.

Adding a plotter to your shop? Apply for a wholesale account.