Installation Tools · Applicators

PPF Squeegee — Large

Contour squeegee for full-panel PPF work

Glacier PPF Squeegee, Large — contour squeegee for paint protection film installers

PPF Squeegee — Large

The Large PPF squeegee is a pink contour squeegee sized for full-panel paint protection film work. It is the largest of the six shaped squeegees Glacier supplies for PPF installers. Large squeegees are generally the ones installers pick up for hoods, doors and other wide, open panels.

Pricing is released to approved trade accounts. Open a trade account →

How installers use it

  1. Keep the top of the film wet with slip solution so the squeegee glides.
  2. Anchor the film, then tack it down across the open panel.
  3. Overlap your strokes so no spot is missed.
  4. Move to a smaller or shaped squeegee for edges, curves and tight sections.

Why shops like it

One wide pass covers more film than a small tool, which suits big flat areas. Because Medium and Small sit below it in the range, the Large can stay on the panels it was sized for.

About the PPF Squeegee — Large

A PPF contour squeegee sized for full-panel work — one of the shaped squeegees Glacier supplies for PPF installers.

Why does PPF need its own squeegees?

PPF follows curved painted panels, so installers use shaped tools rather than a flat glass blade. Glacier supplies each of these as a shaped contour squeegee for PPF installers, in sizes from detail work to full panels.

How do you use a PPF squeegee?

  • Clean and decontaminate the panel before film goes on.
  • Wet the panel and film with your slip solution.
  • Start in the center with the larger squeegee.
  • Work toward the edges in overlapping strokes.
  • Switch to a smaller or shaped squeegee for curves and edges.
  • Check for trapped solution and finish edges per your process.

Who buys PPF squeegees?

  • PPF installers building a full tool roll
  • Tint shops adding PPF
  • Detailers moving into paint protection
  • Fleet and dealership outfitters

Which PPF squeegee for which job?

Match size and shape to the panel. Glacier describes each squeegee as follows:

  • Large
    Shape or size
    Panel-size blade
    What it is for
    Sized for full-panel PPF work
  • Medium
    Shape or size
    Mid-size blade
    What it is for
    Between the Small and Large
  • Small
    Shape or size
    Compact
    What it is for
    Detail work a full-panel squeegee can't reach
  • Angled
    Shape or size
    Angled edge
    What it is for
    Angled trim lines and panel edges
  • Round Corner
    Shape or size
    Rounded corner
    What it is for
    Curved trim lines without a sharp edge catching film
  • Sector
    Shape or size
    Sector shape
    What it is for
    Curved edge for contoured panel sections

Does Glacier supply PPF squeegees to shops across the US?

Glacier serves shops and installers across the US. Ask your Glacier rep about availability and how to set up a trade account.

Quick answers

What panels is the Large squeegee for?

Wide, open panels where film is tacked down across the full panel, such as hoods and doors.

How do I avoid missed spots?

Keep the film wet with slip solution and overlap your strokes.

Which squeegees handle edges and curves?

Small handles tight spots, while Angled, Round Corner and Sector are shaped for edges and curves.

PPF Squeegee — Large
Open a trade accountRequest a quote