How tint shops choose squeegees, blades and hard cards
Tint shops choose squeegees by the job: a hard squeegee for tack-down, a hard card for edges and channels, a contour tool for corners and a replaceable blade for scraping. Blades are consumables, so shops standardize on a few types and change them often. Glacier supplies these tools to shops and installers.
What does each tool do?
Most tint tools fall into four jobs. Match the tool to the step, not to a habit.
| Job | Tool type | Glacier examples |
|---|---|---|
| Tack-down across the glass | Hard squeegee | Big Titan Squeegee, Turbo Squeegee (4 inch and 6 inch) |
| Edges and channels | Hard card | Hard Card, Smart Card |
| Corners, trim and detail | Contour squeegee | Lil Chizler, Swordfish Squeegee, Mini Squeegee, Side Swipe, No Handle Side Swipe |
| Scraping and removal | Scraper and blade | Bulldozer, Conqueror, Gator, Scrubber and replacement blades |
How do I choose a squeegee?
Start with the surface and the step, then pick size and shape. A bigger blade covers more glass per pass; a smaller or pointed blade reaches tight spots.
- Bigger glass: a full-size hard squeegee such as the Big Titan.
- Focused tack-down: a Turbo, in the size that gives you control.
- Tight corners and trim lines: Lil Chizler, Swordfish or Mini Squeegee.
- Door-handle recesses: No Handle Side Swipe.
- PPF on painted panels: the shaped PPF squeegees, not glass tools.

What is the difference between a hard card and a squeegee?
A hard card is a rigid card used to clear channels and glass edges during prep. A squeegee pushes water out from under film across the glass. Most kits carry both.
Glacier has the Hard Card in black, green, red and white, and the Smart Card, which has a rounded profile for a different grip. Ask your rep about any difference beyond color.
How do shops choose blades?
Choose the blade by the surface and by how fast you go through them. Plastic is gentler than steel; steel holds an edge longer.
| Blade type | Typical use | Glacier examples |
|---|---|---|
| Plastic scraper blades | Glass where steel could mark it, including treated or tinted glass | 1 Inch Plastic Scraper Blades |
| Carbon steel scraper blades | Prep and removal on glass | 4 Inch Carbon Steel Blades, 4 Inch Double Edged Carbon Steel Blades |
| Wide blades | Larger flat areas with a wide handle | 8 Inch Beveled Blade, 8 Inch Pro Square Blade (for the 8 Inch Big Mouth Handle) |
| Snap-off utility blades | Trimming and cutting by hand | 9mm Stainless Steel Blades, 30 Degree Black Steel Blade |
| Plotter blades | Cutting patterns on a plotter | Vinyl Cutter Blade |
How often should a blade be changed?
Change it when it drags, skips or leaves lines. A dull blade can scratch glass or tear film.
Changing blades at the start of each job is a common habit.

How do I use blades and cards safely?
- 1. Wet the surface first; dry scraping drags and can score.
- 2. Hold the blade at a shallow, steady angle.
- 3. Use a plastic blade, or ask your installer, on coated or tinted glass.
- 4. Wipe loosened debris away before film comes off the liner.
- 5. Drop spent blades in a disposal container, such as Glacier's Blade Disposal Container, instead of a trash bag.
What would a starter set look like?
This is general shop practice, not a Glacier prescription. Ask your rep to help scope a kit for your bays.
- One full-size hard squeegee and one focused Turbo for tack-down.
- A Hard Card or Smart Card for edges and channels.
- One or two contour tools for corners and handle recesses.
- A scraper handle with plastic and steel blades.
- Snap-off utility blades and a disposal container.
- PPF squeegees if the shop installs paint protection film.

Which squeegee for PPF versus window film?
Window film on glass uses hard squeegees such as the Big Titan and Turbo. PPF on painted panels uses shaped PPF squeegees designed for panel work.
Ask your rep before using a glass tool on paint.

How do shops look after squeegees and cards?
- Rinse tools after each job so grit does not carry to the next.
- Check blade edges for nicks, and retire any that leave lines.
- Store squeegees so the edge does not rest on a hard surface.
- Keep glass tools and paint tools separate.
Where do shops buy these tools?
Glacier sells tools wholesale to tint shops, PPF installers, detailers and dealers, and ships nationwide. Apply for a wholesale account or request a quote. Ask your Glacier rep about pack options and availability.

In this guide
- What does each tool do?
- How do I choose a squeegee?
- What is the difference between a hard card and a squeegee?
- How do shops choose blades?
- How often should a blade be changed?
- How do I use blades and cards safely?
- What would a starter set look like?
- Which squeegee for PPF versus window film?
- How do shops look after squeegees and cards?
- Where do shops buy these tools?
Quick answers
10 questions. Select one to open it.
What squeegee should a window tint shop use?
Most shops use a full-size hard squeegee for tack-down, a smaller or contour tool for corners and trim, and a hard card for edges. Choose by the glass and the step.
What is a hard card used for in window tinting?
A hard card is a rigid card that clears tint channels and glass edges during prep, where debris and moisture can hide. It does not replace a squeegee.
What is the difference between a Hard Card and a Smart Card?
Both are rigid cards for edge and channel work. The Smart Card has a rounded profile that gives a different grip.
Hard card, Turbo or Bulldozer: what is each for?
A hard card clears channels and edges, a Turbo squeegee tacks film down, and the Bulldozer is a wide plastic scraper for film and adhesive removal.
Which blades are safest on window glass?
Plastic blades are gentler than steel and are the usual choice on treated or tinted glass. Wet the surface and replace any blade that drags.
How often should I change a razor or scraper blade?
Change it when it drags, skips or leaves lines. Changing blades at the start of each job is a common habit.
Which squeegee should I use for PPF instead of window film?
PPF installers use shaped squeegees made for painted panels. Glacier has Large, Medium, Small, Angled, Round Corner and Sector PPF squeegees.
Does Glacier sell snap-off utility blades?
Yes. Glacier lists 9mm stainless steel snap-off blades and 30 degree black steel graphics blades for utility knives.
Does Glacier sell tool belts?
Tool belts are not part of the installation tool lines described here. Ask your Glacier rep about items you do not see on the product pages.
Can a shop buy tools in bulk?
Glacier sells wholesale to shops, installers and dealers. Ask your Glacier rep about pack sizes for the tools you use most.
Need installation tools for your shop? Apply for a wholesale account.


