Guide

How to choose architectural window film

Choose architectural window film by matching the film's job (sun and glare control, UV filtering, safety or decoration) to the glass it will go on. Check the glass type, thickness and condition first, then ask your supplier for spec sheets, glass guidance and samples. Glacier supplies architectural film as rolls to tint shops and installers.

Who is this guide for?

It is written for tint shops and installers who quote flat-glass jobs, and for building owners who want to know what a good quote should cover.

Glacier sells wholesale to shops, installers and dealers. Building owners get Glacier film through an installer.

Gloved hands cleaning the corner of a double-pane window before film, sunny home interior.

What types of architectural window film are there?

Most flat-glass film falls into a few families defined by the job it does. Pick the job first, then the film.

Comparison
Film familyWhat it is forCheck before you quote
Solar controlReduces sun heat and glare through office, store and home glassGlass type and thickness, sun exposure, window warranty
Clear UV-filteringProtects furniture, floors and displays from fading while staying clearGlass type, how clear the customer expects it to look
Safety and securityHolds broken glass togetherGlass type, frame, whether edge anchoring is wanted
Decorative and privacyFrosted, gradient, patterned or custom-cut looksWhich side of the glass, how much daylight the room needs
Anti-graffitiReplaceable clear layer that takes scratches and tagsInterior or exterior, how often the glass is targeted

What should you check on the glass before choosing a film?

The glass decides what film is safe to use. Check it before you pick a film, not after.

When in doubt, follow the film maker's glass guidance and the window maker's warranty terms, and put the answer in the quote.

  • Single pane, double pane (insulated glass unit) or laminated.
  • Annealed, tempered or heat-strengthened glass.
  • Special glass, such as low-E glass or glass that is already tinted.
  • Glass thickness and total size of each pane.
  • Condition: chips, cracks, failed seals or fogging between panes.
  • Exposure: how much direct sun each pane gets, and whether anything shades part of it.
  • Frame type and edge condition, especially for safety and security film.
Gloved hand holding a film sample against a glass curtain wall with a city skyline behind

How do you match a film to the job?

Work through the job in order. It keeps the conversation with the customer short and the quote defensible.

  • 1. Ask what problem the customer has: heat, glare, fading, privacy, broken glass or tagging.
  • 2. Walk the building and list every pane type from the checklist above.
  • 3. Choose the film family that fits the problem and the glass.
  • 4. Request spec sheets and a sample, and hold the sample against the actual glass.
  • 5. Check the window warranty and the film maker's glass guidance for each glass type.
  • 6. Quote the job with the film, the glass notes and the care instructions.

What should you ask an architectural film supplier?

A good supplier answers these plainly and in writing. Use the list for any supplier, Glacier included.

  • Which film families do you stock for flat glass, and in what roll widths?
  • Do you have spec sheets I can attach to a bid?
  • What glass types is each film approved for, and who stands behind that guidance?
  • What are the warranty terms, and what voids them?
  • Can I get samples before I order a roll?
  • How do you handle reorders when I need the same film for a phase-two job?
  • What support do installers get on difficult glass?
Installer seen from behind on a platform lift applying film to a tall atrium window

How is architectural film different from automotive film?

Architectural film goes on flat glass in buildings. Automotive film is cut and shrunk to fit curved vehicle glass and is chosen with state tint laws in mind.

Glacier sells both, but they are separate lines. See the architectural and automotive pages for each.

Can customers preview film before the job?

Yes. The Glacier flat glass simulator lets a shop show a customer how a film looks on glass before anyone cuts a roll.

Samples from your rep are the second check: always look at film on the real glass in real light.

White-gloved hand holding a film sample at an office window with the city beyond

How is architectural film installed?

Installers follow the same basic method on every job. Good prep matters more than any single product choice.

  • 1. Walk the building and record every pane.
  • 2. Clean the glass and the frame edges thoroughly.
  • 3. Cut film to size from the roll, leaving a small allowance.
  • 4. Apply slip solution, position the film and squeegee out the water.
  • 5. Trim the edges and check for dust, creases and bubbles.
  • 6. Give the customer care instructions, including how soon to clean.

What mistakes should installers avoid?

Most callbacks trace back to a skipped check, not a bad roll.

  • Quoting before checking glass type and warranty.
  • Promising energy savings or glass strength the film cannot guarantee.
  • Skipping a sample on the real glass in real light.
  • Treating all film families as interchangeable.
  • Leaving the glass guidance out of the written quote.
A gloved hand smoothing architectural window film on a tall office glass wall, interior daylight.

How do shops order architectural film from Glacier?

Open a wholesale account or request a quote. Glacier ships nationwide. Ask your Glacier rep about availability and timing for your order, and for spec sheets and samples.

In this guide
  1. Who is this guide for?
  2. What types of architectural window film are there?
  3. What should you check on the glass before choosing a film?
  4. How do you match a film to the job?
  5. What should you ask an architectural film supplier?
  6. How is architectural film different from automotive film?
  7. Can customers preview film before the job?
  8. How is architectural film installed?
  9. What mistakes should installers avoid?
  10. How do shops order architectural film from Glacier?

Quick answers

10 questions. Select one to open it.

Who supplies architectural window film to commercial installers?

Several suppliers sell architectural film to installers. Glacier supplies it as rolls to tint shops and installers on a wholesale account. Ask any supplier for spec sheets, glass guidance and samples before you commit.

What types of commercial window film are there?

The main families are solar control, clear UV-filtering, safety and security, decorative and privacy, and anti-graffiti film. Each does a different job, so choose the family by the problem the building has.

Who supplies architectural window film to installers?

No supplier is right for every shop. Compare spec sheets, glass guidance, roll availability, samples and rep support. Glacier supplies architectural film to tint shops and installers wholesale and ships nationwide.

What glass can architectural film go on?

Many window types can take film, but not every film suits every glass. Check glass type, thickness and condition, then follow the film maker's glass guidance and the window warranty.

Can window film go on double-pane windows?

Often yes, but double-pane units are more sensitive to heat build-up. Confirm approval for that glass type from the film maker and the window maker before you quote.

Will window film void my window warranty?

It can, depending on the window maker's terms. Read the window warranty first and keep written approval with the job file.

Can window film crack glass?

Film can add heat stress to glass in some conditions, especially large panes, shaded areas next to sun-exposed areas, or glass with existing damage. This is why the glass checks come first.

How long does an architectural film installation take?

It depends on the number and size of panes, access, glass prep and the film type. Ask the installer for a schedule based on a walk of the building.

Does Glacier provide spec sheets for bids?

Ask your Glacier rep about spec sheets for the film you need.

Can a building owner buy architectural film directly from Glacier?

No. Glacier sells wholesale to tint shops, installers and dealers. Building owners can use the dealer finder to see Glacier dealers near you.

Install architectural film? Apply for a wholesale account.