Installation Tools · Blades & Knives

Blade Disposal Container

Container for spent blades

Glacier Blade Disposal Container — dedicated container for spent blades

Blade Disposal Container

Blade Disposal Container is a dedicated container for spent blades. It keeps loose blades out of trash bags, pockets and floor mats, which is where they end up when there is nowhere to put them. The body is blue with a yellow end and the Glacier logo.

Pricing is released to approved wholesale accounts. Open a wholesale account →

How installers use it

  1. Set the container on the tool cart or bench within reach of where blades are changed.
  2. Drop each spent blade or snapped-off segment in as soon as it comes off the tool.
  3. Mark the container as sharps so nobody reaches in or mistakes it for trash.
  4. Stop adding blades before the container is full, then dispose of it following local rules.

Location decides whether a sharps container gets used. Put the Blade Disposal Container where the blade change actually happens, on the cart beside the knife or on the bench by the scraper handle, so the spent blade goes in within a hand's reach. For snapped-off segments, drop them in as soon as they separate, rather than leaving them on the glass or the floor where a sharp fragment is easy to miss.

Gloved hand dropping a small used scraper blade into the slot of the blue blade disposal container

Why shops like it

Safety guidance for blade disposal is consistent: spent blades belong in a rigid, puncture-resistant container with a secure closure, not loose. A set place for them keeps a cart or bench free of exposed edges.

Blue-gloved hands holding the blue blade disposal container while sliding a spent blade into its yellow end slot above a bin

At a glance

Type
blade disposal container
Colors in photo
blue body, yellow end
Note
Marked with the Glacier logo
Blue blade disposal container with a yellow rounded end standing on a steel bench

Pairs with

Utility blades in 9mm and 30 Degree and the scraper blade packs are the cutting items; the Blade Disposal Container is the one that holds spent blades.

Dropping a used blade into the container.

Why use the Blade Disposal Container?

Loose blades hurt people. A dedicated container keeps spent edges contained until disposal.

  • Built for spent blades.
  • Contains blades instead of leaving them in a bag or pocket.
  • Supplied by Glacier to tint and PPF shops.

The container is as much a habit as a product. Keep it for blades only, never push blades down with your hand, and stop adding before it is full so nothing sticks out. Show everyone in the bay where it lives, and keep it away from children and the public. The 9mm Stainless Steel Blades, 30 Degree Black Steel Blade and Vinyl Cutter Blade it pairs with all end up here when spent.

Macro of the working edge of a small blade disposal container with a slot lid against a bench, beaded water, a dark blue hatchback blurred behind.

How do you use the Blade Disposal Container?

  • 1. Keep the container within reach of every bay.
  • 2. Place spent blades in as soon as you swap them.
  • 3. Never push blades down with your hand.
  • 4. Keep it out of reach of children and the public.
  • 5. When full, dispose of it per your local disposal rules.

Who buys the Blade Disposal Container?

  • Tint shops.
  • PPF and wrap shops.
  • Mobile installers.
  • Fleet outfitters.
A black blade disposal container on an open tool roll while gloved hands slide a used blade into it.

How does the Blade Disposal Container compare with other blade items?

Comparison
ItemRole
Blade Disposal ContainerHolds spent blades
9mm / 30 Degree bladesUtility knife blades
Scraper blade packsReplacement scraper blades

What should you check before ordering?

Plan on at least one per work area, and put it where blades are changed. The listing does not give size or capacity, so ask your rep how many blades it holds if that matters for your volume. Local disposal rules vary, so check them.

Where do shops get it?

Glacier serves shops and installers across the US; ask your Glacier rep about availability. Request a quote for Blade Disposal Container. Glacier sells to shops, installers and dealers, not to drivers or homeowners directly.

A gloved hand turning a small blade disposal container with a slot lid to inspect it above a clean workbench with a cutting mat.

Quick answers

What goes in it?

Spent blades, such as used utility blades and snapped-off segments.

What do I do when it is full?

Dispose of it according to local rules, which vary.

Why not just use the trash?

Loose blades in bags, pockets or on mats are a cutting hazard. A rigid container keeps them contained.

Blade Disposal Container
Open a wholesale accountRequest a quote