Installation Tools · Scrapers

Conqueror: rigid scraper for tint removal

Rigid scraper for tint and adhesive work

Glacier Conqueror scraper

Conqueror

The Conqueror is a rigid scraper for tint and adhesive removal, built for the pull rather than just the prep, when old film has to come off clean before the new roll goes down. Glacier supplies it to tint shops, mobile removal crews and detailers who buy wholesale.

Pricing is released to approved wholesale accounts. Open a wholesale account →

How installers use it

  1. Wet the glass thoroughly with slip solution.
  2. Lift a corner of the old film.
  3. Use the rigid edge to pull and shear the film away.
  4. Clear the adhesive, wipe clean, then rinse and store the tool.
Gloved hand pulling a black foam-bodied Conqueror squeegee with a white blade across a wet windshield corner

Why shops like it

The rigid edge is built for pulling old film and adhesive, and wet glass is the intended use, where slip solution helps it glide. Shops that do removal work get a dedicated tool for the pull.

Gloved hand working the black Conqueror squeegee along the edge of wet window glass

At a glance

Type
rigid scraper
Use
tint and adhesive removal, on wet glass
Photo colors
black body with Glacier logo, white edge
Macro of the black foam body and white blade edge of the Conqueror squeegee on beaded glass

Pairs with

Compared with the Scrubber, which adds a pad for residue, the Conqueror is the tool for the pull itself.

Lifting old film from a rear window.

Why use the Conqueror?

The Conqueror has a rigid edge for pulling old film and adhesive, and works best on wet glass, where slip solution keeps the edge shearing old film and adhesive without gouging the surface underneath.

Removal work leaves adhesive behind, and the rigid edge is meant for pulling old film and adhesive, not only prep scraping. Ask your rep about sizes.

A removal job goes faster when old film is lifted instead of chipped away in pieces. Start at a corner with the glass soaked and get a clean lift, then keep the rigid edge low and push so it shears between film and pane while your other hand draws the film back. Pulling and shearing together tends to keep the film in large sheets, which leaves less adhesive on the glass for the cleanup stage.

Close-up of a firm-edge squeegee with a contoured handle meeting a door panel with a clean water line behind it.

How do you use the Conqueror?

  • Wet the glass thoroughly.
  • Lift a corner of old film.
  • Use the rigid edge to pull and shear.
  • Clear adhesive.
  • Wipe clean.
  • Rinse and store.

Rigid does not mean all-purpose. The edge is meant for wet glass, not painted trim, so treat the border of the window as a boundary. When the work moves to paint or soft trim, set the Conqueror down and pick up the Gator. Once the film is off, expect adhesive to remain, which is the point to bring in the Scrubber and its pad rather than pressing harder with the rigid edge.

Who buys the Conqueror?

  • Tint shops doing removals
  • Mobile removal crews
  • Fleet outfitters
  • Detailers
Two installers' backs at adjacent cars, a firm-edge squeegee with a contoured handle resting on a shared cart between them.

How does the Conqueror compare with other Glacier tools?

Conqueror is rigid; Gator is flexible; Bulldozer is wide plastic.

Comparison
ToolShape or formatWhat it is for
ConquerorRigid scraperPulling old film and adhesive
GatorFlexible plasticGlass and paint-safe scraping
BulldozerWide plasticMore coverage per pass

Does Glacier supply Conqueror to shops across the US?

Glacier serves shops and installers across the US. Ask your Glacier rep about availability and how to set up a wholesale account.

Quick answers

What is the Conqueror used for?

Tint and adhesive removal. It is built for pulling old film, not only for prep scraping.

Does the Conqueror need slip solution?

Glacier lists it as pairing with slip solution. Wet glass is the intended use, and the solution helps the rigid edge glide.

Conqueror or Gator?

The Conqueror is rigid and built for removal. The Gator is a flexible plastic scraper.

How do I get the first lift when old film will not peel?

Soak the glass thoroughly with slip solution, then work a corner of the film up with the rigid edge. Once a corner is lifted, hold it and shear along the glass. Keep the area wet so the film releases in one piece.

What do I use after the Conqueror has pulled the film?

Expect adhesive on the glass. The Scrubber's pad handles residue a blade leaves behind, and the Bulldozer clears open stretches. Wipe the glass clean and look it over in good light before any new film goes down, so nothing from the removal carries into the fresh install.

Conqueror
Open a wholesale accountRequest a quote