Florida window tint laws
Florida window tint law (316.2955) splits limits by window and vehicle type. Sedans need 28% minimum on front side windows, 15% behind the driver and 15% on the rear window, which needs side mirrors on both sides. SUVs allow 6% behind the driver and on the rear window, with the front at 28%. A +/-3 point tolerance applies.
Reflectance is measured on the nonfilm side, with maximums of 25% (front) and 35% (back). The windshield may carry a transparent sunscreen strip at the top, not past the AS-1 line; the data lists no inch figure.
Florida's medical exemption comes from the FLHSMV, as a certificate with a decal; it is nontransferable, and the statute states no darkness figure. The data also records a pressure-sensitive, nonremovable label from the installer or seller on the inside left door jamb, with factory FMVSS 205 glazing exempt.
Florida's record cites Fla. Stat. 316.2951 through 316.2955 and 316.29545, and it was last verified on November 12, 2026.
Glacier supplies window film to tint shops and installers nationwide; see the shade and product pages for lines.
This is general information, not legal advice; check your state's current rules before choosing a shade.

Florida VLT limits by window
Cars and sedans
Side windows forward of/adjacent to driver
Windows behind the driver
Rear needs side mirrors both sides
Windshield. Transparent sunscreen strip at top only, not past AS-1 line; no inch figure
SUVs, vans and trucks
Side windows forward of/adjacent to driver
Multipurpose passenger vehicle allowance
Multipurpose vehicle; side mirrors both sides
Windshield. Transparent sunscreen strip at top only, not past AS-1 line; no inch figure

Official sources
- Fla. Stat. 316.2953
- Fla. Stat. 316.2954
- Fla. Stat. 316.2952
- Fla. Stat. 316.29545
- Fla. Stat. 316.2955
- Fla. Stat. 316.2951
A guide, not legal advice: tint laws change, so confirm the current rules with Florida before you install. Last verified November 12, 2026.
Film lines for Florida shops
Glacier sells automotive window film in several visible light transmission (VLT) options. Compare the three ceramic lines (Premium Ceramic, Ceramic Plus and Ceramic Ultimate Plus), see the full window film range, or open a wholesale account. Not sure which shade fits Florida’s limits? Check the table above and confirm with Florida before you quote a film.
To go further, read how to read tint VLT percentages, automotive window film rolls, how ceramic and carbon tint differ and windshield tint strip rules by state.
Florida tint law questions
How dark can front windows be in Florida?
Side windows forward of or adjacent to the driver must pass at least 28% of light. The statute applies a plus or minus 3 percentage point tolerance to every percentage measurement, and front reflectance may not exceed 25%.
What are Florida's limits for SUVs and vans?
Multipurpose passenger vehicles may use 6% VLT on windows behind the driver and on the rear window, with outside mirrors on both sides. Sedans stay at 15% on those windows. Front side windows are 28% for both vehicle types.

Does Florida require a tint label?
Yes. Installers and sellers must provide a pressure-sensitive, nonremovable label with the trade name and business name, affixed to the inside left door jamb. Factory FMVSS 205 glazing is exempt from the label rule under section 316.2955.
Does Florida allow a medical tint exemption?
Yes. FLHSMV issues a nontransferable exemption certificate and decal for conditions such as lupus, autoimmune disorders or other light-limiting conditions. The statute states no minimum VLT for exempt vehicles, so confirm the exact limit with FLHSMV.
Picking a shade? See choosing the right VLT, try it in the Film Studio or request a quote.

