Idaho window tint laws
Idaho applies one set of limits to sedans and SUVs under Idaho Code 49-944 (amended 2023 ch. 112), each with a +/-3 tolerance per statute: 35% on the front side vents and windows, 20% on the side windows behind the driver, and 35% on the rear window.
What a shop checks before quoting in Idaho
For Idaho, the data applies one set of rows to sedans and SUVs under Idaho Code 49-944 (am. 2023 ch. 112): 35% on the front, 20% behind the driver and 35% on the rear window. The notes field adds +/-3 percentage points on all figures, so a shop records the meter reading for each window rather than a single number. Film must be nonreflective, and the windshield row reads nonreflective film not below the AS-1 line, or, if there is none, not below a line 6 inches below the upper edge. The data lists no color rule, and the statute requires no certificate.
Film must be nonreflective, with a luminous reflectance maximum of 35% (+/-3). On the windshield, nonreflective film may not go below the AS-1 line; if there is no AS-1 line, it may not go below a line 6 inches below the top. The record lists no color rule.
For medical need, the data says to carry written physician verification in the vehicle. Under that route, windows are 20% and the windshield 70% (each +/-3), with reflectance at 35% maximum. The statute requires no certificate.
Where this page points: Idaho Code 49-944 (am. 2023 ch. 112); the Idaho record carries a verification date of November 12, 2026.
Glacier supplies window film to tint shops and installers nationwide; see the shade and product pages for lines.
This is general information, not legal advice; check your state's current rules before choosing a shade.
Idaho window tint law for sedans: front side windows 35% VLT or more, back side windows 20% VLT or more, rear window 35% VLT or more. The table lists SUVs, vans and trucks separately; confirm the current rule with your state before you quote.
| Vehicle | Front side | Back side | Rear window |
|---|---|---|---|
| Sedan | 35% VLT or more | 20% VLT or more | 35% VLT or more |
| SUV, van or truck | 35% VLT or more | 20% VLT or more | 35% VLT or more |
Source: Idaho Code 49-944 (am. 2023 ch. 112). Data last verified 2026-11-12. Some states also set outside-mirror or reflectance conditions on these windows; see the state page.

Idaho VLT limits by window
Cars, sedans, SUVs, vans and trucks
Front side vents/windows; +/-3 per statute
Side windows behind driver; +/-3
Rear window; +/-3 per statute
Windshield. Nonreflective film not below AS-1 line; if none, not below line 6 inches below top

Official sources
A guide, not legal advice: tint laws change, so confirm the current rules with Idaho before you install. Last verified November 12, 2026. Sources for this record: Idaho Code 49-944 (am. 2023 ch. 112). The data was last verified November 12, 2026.
Film lines for Idaho shops
Glacier sells automotive window film in several visible light transmission (VLT) options. Compare the three ceramic lines (Premium Ceramic, Ceramic Plus and Ceramic Ultimate Plus), see the full window film range, or open a wholesale account. Not sure which shade fits Idaho’s limits? Check the table above and confirm with Idaho before you quote a film.
Shops working on this topic also use how to read tint VLT percentages, automotive window film rolls, how ceramic and carbon tint differ and windshield tint strip rules by state.
How do I confirm the current Idaho rule before installing?
Before you quote a job, read the statute named in the official sources above and ask Idaho's motor vehicle agency or state police whether anything has changed.
- Read the cited rule for each window you plan to tint.
- Compare the verified date on this page with today's date.
Idaho tint law questions
What is the Idaho front window tint limit?
Front side vents and windows must pass at least 35% of light, with a plus or minus 3 tolerance in the statute. The same front limit applies to sedans and SUVs.
How dark can Idaho rear side windows be?
Side windows behind the driver need at least 20% VLT, again plus or minus 3. The rear window itself must pass 35%. Both vehicle classes follow these figures, so SUVs get no extra allowance here.

What does Idaho allow for medical tint?
A written physician verification, carried in the vehicle, permits windows at 20% and a windshield at 70% (each plus or minus 3), with reflectance up to 35%. The statute requires no label or certificate for ordinary tint.
Is mirrored film allowed in Idaho?
Film must be nonreflective, and luminous reflectance can be no more than 35% (plus or minus 3). Highly reflective or mirrored films are therefore a poor fit. The windshield rule also requires nonreflective film placed above the AS-1 line.
Does Idaho list a color rule or certificate for tint?
The data lists no color rule, and it says no certificate is required by statute. The nonreflective film requirement and the +/-3 tolerance on each figure still appear in the row, so a shop confirms those before quoting. Confirm the details with your state.
How do I confirm the current Idaho tint rule?
The state page lists Idaho Code 49-944 (am. 2023 ch. 112) on the legislature.idaho.gov site. Compare the text with the table before quoting a film. The data was last verified November 12, 2026, and tint rules change, so confirm with Idaho before you install.
Picking a shade? See choosing the right VLT, try it in the Film Studio or request a quote.

