Kansas window tint laws
Kansas lists one set of numbers for sedans and SUVs under K.S.A. 8-1749a (L. 2019 ch. 61): 35% on the front side windows, 35% on the side windows behind the driver, and 35% on the rearmost window. The front figure is a total light transmission with other devices, so combine it with whatever else is on the glass.
All covered windows must be nonreflective, with no numeric limit. On the windshield, tint must be nonreflective and not red, yellow or amber, along the top and not below the AS-1 line.
The medical route is narrow. The data says it is limited to clear colorless film of 78% VLT or more, with a physician or optometrist statement, and the glazing must still meet FMVSS 205. The statement must be carried; no certificate is required for tint itself.
Source: K.S.A. 8-1749a (L. 2019 ch. 61). Verified for Kansas on November 12, 2026.
Glacier supplies window film to tint shops and installers nationwide; see the shade and product pages for lines.
This is general information, not legal advice; check your state's current rules before choosing a shade.
Kansas window tint law for sedans: front side windows 35% VLT or more, back side windows 35% VLT or more, rear window 35% VLT or more. The table lists SUVs, vans and trucks separately; confirm the current rule with your state before you quote.
| Vehicle | Front side | Back side | Rear window |
|---|---|---|---|
| Sedan | 35% VLT or more | 35% VLT or more | 35% VLT or more |
| SUV, van or truck | 35% VLT or more | 35% VLT or more | 35% VLT or more |
Source: K.S.A. 8-1749a (L. 2019 ch. 61). Data last verified 2026-11-12. Some states also set outside-mirror or reflectance conditions on these windows; see the state page.

Kansas VLT limits by window
Cars, sedans, SUVs, vans and trucks
Total light transmission with other devices
Side windows behind driver
Rearmost window
Windshield. Nonreflective, not red/yellow/amber, top only, not below AS-1 line

Official sources
A guide, not legal advice: tint laws change, so confirm the current rules with Kansas before you install. Last verified November 12, 2026. Sources for this record: K.S.A. 8-1749a (L. 2019 ch. 61). The data was last verified November 12, 2026.
Film lines for Kansas shops
Glacier sells automotive window film in several visible light transmission (VLT) options. Compare the three ceramic lines (Premium Ceramic, Ceramic Plus and Ceramic Ultimate Plus), see the full window film range, or open a wholesale account. Not sure which shade fits Kansas’s limits? Check the table above and confirm with Kansas before you quote a film.
To go further, read how to read tint VLT percentages, automotive window film rolls, how ceramic and carbon tint differ and windshield tint strip rules by state.
How do I confirm the current Kansas rule before installing?
Before you quote a job, read the statute named in the official sources above and ask Kansas's motor vehicle agency or state police whether anything has changed. Remember that the front reading includes everything else on the glass.
- Read the cited rule for each window you plan to tint.
- Compare the verified date on this page with today's date.
Kansas tint law questions
What is the Kansas front window tint limit?
Front side windows must pass at least 35% of light, measured as total transmission with other devices. The statute states no numeric tolerance, so there is no built-in allowance for meter variance.
Do Kansas rear windows have different limits?
No. Side windows behind the driver and the rearmost window also need 35%, and sedans and SUVs follow the same numbers. All covered windows must be nonreflective, though no numeric reflectance cap is given.

What kind of medical tint does Kansas allow?
Limited exemption: clear, colorless film of 78% VLT or more, supported by a physician or optometrist statement. Glazing must still meet FMVSS 205, and the medical statement must be carried in the vehicle.
What are the windshield rules in Kansas?
Film must be nonreflective, applied at the top only, not below the AS-1 line, and not red, yellow or amber. No certificate is required for ordinary tint, and a medical statement must be carried for medical film.
Which windshield colors does the Kansas data name?
The data names red, yellow or amber on the windshield. Film there must also be nonreflective, along the upper edge only, and not below the AS-1 line. The data lists the same windshield row for sedans and SUVs.
How do I confirm the current Kansas tint rule?
The state page lists K.S.A. 8-1749a (L. 2019 ch. 61) on the ksrevisor.gov site. Compare the text with the table before quoting a film. The data was last verified November 12, 2026, and tint rules change, so confirm with Kansas before you install.
Picking a shade? See choosing the right VLT, try it in the Film Studio or request a quote.

